CP7748TL 1/2" Muttertrekker DEMO CP7748TL 1/2" Muttertrekker DEMO CP7748TL 1/2" Muttertrekker DEMO CP7748TL 1/2" Muttertrekker DEMO

CP7748TL 1/2" Muttertrekker


Varenr: 8941077487-B

CP7748TL Muttertrekker

1/2" Muttertrekker med masse krefter, perfekt ergonomi og unik momentkontroll!

I tillegg så har denne muttertrekkeren redusert moment på tiltrekning - dvs perfekt

for kontrollert tiltrekning av hjul på personbiler. I tillegg har den et lavt vibrasjonsnivå. 

Dette er en robust trekker fra CP med super slagkraft i revers. Aluminium baklokk, kompositthus, komfort-grep og svivel på inntaket sørger for maksimal kontroll!


Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse


1/2" composite impact wrench with friction ring socket retainer1
 2 positions: one in Reverse and one Torque Limited in forward
90 Nm in torque limited position in forward

1300Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet

The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. 
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.

Part number8941077487
Actual air consumption12 l/s
Air inlet thread size1/4 "
Average air consumption3 l/s
Blows per minute1350
Box dimensions95*210*240 mm
Clutch typeTwin Hammer
Free speed7000 rpm
Handle typePistol
Length175 mm
Maximum Torque (reverse)1300 Nm
Min. hose size10 mm
Net weight2.0 kg
Over carton455*230*418 mm
Power/weight ratio650 Nm/kg
Side to center39 mm
Socket retainerFriction ring
Sound Power105,3 db(A)
Sound pressure94,3 db(A)
Square drive1/2 "
Vibration12 m/s²
Vibration ISOISO-28927-2
Vibration uncertainty (K)4,5 m/s²
Working Torque Range (fwd)90 - 140 Nm