Benefits

Unique
2 shut off positions
Powerful
High resistance to drop
High durability
Convenient 
SIDE2SIDE
High Comfort

Features

4 settings in forward, to be set up with the touch pad on the back side of the tool
- Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
- Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm)
50%: around 425 ft.lbs / 580 N
100% of maximum torque around 850+ ft.lbs / 1150+ Nm 
1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
5 bumpers all around the tool, 1 in front of the clutch housing
Brushless motor
4 Front LED lights for dark spaces
Single-hand Forward and Reverse operation plus Safety locking position 
Soft thermoplastic rubber grip 
The CP8849 Series is to be used as a « snugging » tool to come close to the car manufacturer’s specified torque rating. The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of overtightening. 
Torque results could vary greatly depending on the type of wheel and many other factors.

Content of the pack

One CP8849-2 
Two 4.0 Ah battery packs 
One 20V charger 
One Chicago Pneumatic soft bag 
One appropriate plug based on the country of origin of the order