Benefits

Unique
2 shut off positions
Powerful
High resistance to drop
High durability
Convenient 
SIDE2SIDE
High Comfort

Features

4 settings in forward, to be set up with the touch pad on the back side of the tool
- Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
- Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm)
50%: around 425 ft.lbs / 580 N
100% of maximum torque around 850+ ft.lbs / 1150+ Nm 
1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
5 bumpers all around the tool, 1 in front of the clutch housing
Brushless motor
4 Front LED lights for dark spaces
Single-hand Forward and Reverse operation plus Safety locking position 
Soft thermoplastic rubber grip 
The CP8849 Series is to be used as a « snugging » tool to come close to the car manufacturer’s specified torque rating. The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of overtightening. 
Torque results could vary greatly depending on the type of wheel and many other factors.